Welcome to the Quality Gate for the Marin V.1 Regular!
Start
 
What is this fixture's name?


 
What is this fixture's Job Number? *

XXXXX-XX
 
What is this fixture's Serial Number? *

XXXX-XXXX
 
Which material below matches the finish chart for {{answer_12207244}} and is it correct on this order?


 
Who is performing this inspection? *












 
Who performed the work? *











 
What Quality Gate are you inspecting? *


 
(m) Did this fixture pass this Quality Gate the first time?

     
 
(m) Choose one INT code for issue found at this Quality Gate:


 
(m) Add any notes or detailed descriptions of the non-conformance(s):

 
Congratulations on completing the Matl. Mgt. Quality Gate!

 
Does the socket exceed 1.6" in total height? *

     
 
Does the metal spin OD match the wooden bowl OD? *

     
 
Do you have all loose parts/hardware required to move to the next step?

     
 
(c) Did this fixture pass this Quality Gate the first time with no rework, touch up, etc.?

     
 
(c) Choose one INT code for issue found at this Quality Gate:


 
(c) Add any notes or detailed descriptions of the non-conformance(s):

 
Congratulations on completing the Craft Quality Gate!

 
Is the fixture free of scratches and dents? *

     
 
Do you have all loose parts/hardware required to move to the next step?

Count the parts and then answers questions below:
 
How many FST-6-32x3/8-SSSS do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many CHK-TAP-7/8 do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many FST-8-32x1 1/2-PHPH-BMS do you have? *

 
Incorrect. You should have 2 of these parts.

 
How many NIP-HEX-5-16-1-8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-1-1/8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-2 3/4-1/8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many CNDL-SLV-7/8x9-NO-NCH do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many CPL-PLN-10-126 do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-7-.125P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many MNT-AA-022-ST do you have? *

 
Incorrect. You should have 1 of these parts.

 
(s) Did this fixture pass this Quality Gate the first time with no rework, touch up, etc.?

     
 
(s) Choose one INT code for issue found at this Quality Gate:


 
(s) Add any notes or detailed descriptions of the non-conformance(s):

 
Congratulations on completing the Surface Prep Quality Gate!

 
Does the fixture finish match the work order? *

     
 
Is the finish consistent throughout the entire fixture? *

     
 
Is the finish free of any visible defects in the finish (i.e. scratches, spots, inconsistent coverage)? *

     
 
Do you have all loose parts/hardware required to move to the next step?

Count the parts and then answers questions below:
 
How many FST-6-32x3/8-SSSS do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many CHK-TAP-7/8 do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many FST-8-32x1 1/2-PHPH-BMS do you have? *

 
Incorrect. You should have 2 of these parts.

 
How many NIP-HEX-5-16-1-8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-1-1/8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-2 3/4-1/8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many CNDL-SLV-7/8x9-NO-NCH do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many CPL-PLN-10-126 do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-7-.125P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many MNT-AA-022-ST do you have? *

 
Incorrect. You should have 1 of these parts.

 
(f) Did this fixture pass this Quality Gate the first time with no rework, touch up, etc.?

     
 
(f) Choose one INT code for issue found at this Quality Gate:


 
(f) Add any notes or detailed descriptions of the non-conformance(s):

 
Congratulations on completing the Finishing Quality Gate!

 
Is the fixture and hardware free of any finish defects? *

     
 
* Was the mounting plate installed to the back of the fixture?

     
 
Has the ground wire been attached to the steel mounting plate that is attached to back of the fixture? *

     
 
Did the fixture pass all Hi-Pot, Ground Continuity, and light bulb testing? *

     
 
Are all loose parts/hardware packed with the fixture?

 
(1) BLB-MB-40WA 19CLR (LED Bulb) *

     
 
(2X) FST-8-32X1.5-PHPH-BMS Machine Screws *

     
 
(2X) FST-#8 X 1.5-PHPH-SMS Wood Screws *

     
 
(2X) FST-WASH-#8 Washers *

     
 
(2X) #6-8 WALL ANCHOR *

     
 
* (2X) FST-WIR-NUT-BLUE

     
 
Was the fixture packed per the Final Work Instructions? *

     
 
Was the fixture cold formed when Packed?

     
 
* Is the candle sleeve straight?

     
 
(g) Did this fixture pass this Quality Gate the first time with no rework, touch up, etc.?

     
 
(g) Choose one INT code for issue found at this Quality Gate:


 
(g) Add any notes or detailed descriptions of the non-conformance(s):

 
Congratulations on completing the GWP Quality Gate!

Thank you, {{answer_9331494}}!
again
Thank you, {{answer_9331494}}!
again