Welcome to the Quality Gate for the Punch!
Start
 
What is the Job Number? *

XXXXX-XX
 
Who performed the work? *



 
Who is performing this inspection? *






 
How many fixtures are being assessed?

 
What Quality Gate are you inspecting? *


 
Are the entirety of the base and screws sanded and sandblasted? *

     
 
Are there neither rounded edges nor machine lines in the base? *

     
 
Do you have all loose parts/hardware required to move to the next step?

Count the parts and then answers questions below:
 
How many FST-8-32x1/2-FHSL-BMS do you have per fixture? *

 
Incorrect. You should have 2 of these parts.

 
How many FST-8-32x1/4-PHPH-BOS do you have per fixture? *

 
Incorrect. You should have 2 of these parts.

 
How many FST-THUMB-B4535 do you have per fixture? *

 
Incorrect. You should have 2 of these parts.

 
How many MNT-CRSBAR-HD1-8F do you have per fixture? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-1/2-1/8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-1-1/8P do you have? *

 
Incorrect. You should have 1 of these parts.

 
How many WIR-PIPE-INSERT do you have? *

 
Incorrect. You should have 2 of these parts.

 
If necessary, please fill out an INC before moving the fixture to Finishing.

 
Congratulations on completing the Surface Prep Quality Gate!

 
Does the fixture finish match the rest of the work order? *

     
 
Is the finish free of any visible defects in the finish (i.e. scratches, spots, inconsistent coverage)? *

     
 
Is the fixture lacquered? *

     
 
Do you have all loose parts/hardware required to move to the next step?

Count the parts and then answers questions below:
 
How many FST-8-32x1/2-FHSL-BMS do you have per fixture? *

 
Incorrect. You should have 2 of these parts.

 
How many FST-8-32x1/4-PHPH-BOS do you have per fixture? *

 
Incorrect. You should have 2 of these parts.

 
How many FST-THUMB-B4535 do you have per fixture? *

 
Incorrect. You should have 2 of these parts.

 
How many MNT-CRSBAR-HD1-8F do you have per fixture? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-1/2-1/8P do you have per fixture? *

 
Incorrect. You should have 1 of these parts.

 
How many NIP-1-1/8P do you have per fixture? *

 
Incorrect. You should have 1 of these parts.

 
How many WIR-PIPE-INSERT do you have? *

 
Incorrect. You should have 2 of these parts.

 
If necessary, please fill out an INC before moving the fixture to Packout.

 
Congratulations on completing the Finishing Quality Gate!

 
Is the fixture and hardware free of any finish defects? *

     
 
Is the foam set properly and thick enough in the box? *

     
 
Are the installation packets, light bulb, and blue wire nuts all packed in the box? *

     
 
Has the ground screw been added to the mounting plate that is attached to back of the fixture? *

     
 
Did the fixture pass all Hi-Pot, Ground Continuity, and light bulb testing? *

     
 
Was the fixture packed per the Final Work Instructions? *

     
 
If necessary, please fill out an INC before clocking out the fixture.

 
Congratulations on completing the Packout Quality Gate!

Thank you, {{answer_23011206}}!
again
Thank you, {{answer_23011206}}!
again